2-Cyanoethyl dimethyldithiocarbamate, a new contact allergen found in accelerator-free nitrile gloves.

BACKGROUND: Allergic contact dermatitis (ACD) from rubber glove usage is usually caused by rubber additives such as the accelerators. However, in analyses of the suspected gloves, ordinary rubber allergens are not always found. Accelerator-free rubber gloves are available, but some patients with accelerator allergy do not tolerate them and might also be patch test positive to them. OBJECTIVES: To identify and chemically characterize a new allergen, 2-cyanoethyl dimethyldithiocarbamate (CEDMC), in rubber gloves. We describe two patient cases: patient 1 that led us to the identification of CEDMC and patient 2 with occupational ACD caused by CEDMC. METHODS: The patients were examined with patch testing including baseline and rubber series, and their own rubber gloves. High-performance liquid chromatography (HPLC) was used for chemical analysis of rubber gloves. The allergen was synthesized and identified by nuclear magnetic resonance, mass spectrometry and infrared spectrometry, and tested on patient 2. RESULTS: CEDMC was identified by HPLC in a nitrile glove associated with hand eczema in patient 1. Patient 2 whose nitrile gloves contained CEDMC was patch test positive to CEDMC. CONCLUSIONS: CEDMC is a new contact allergen in nitrile gloves and probably forms during vulcanization from residual monomer acrylonitrile and rubber additives.

Does exposure to polymethyl methacrylate bone cement increase the risk of surgical glove failure?

INTRODUCTION: Surgical glove perforation has been linked to a double-fold increased risk of surgical site infection. Infection in the context of arthroplasty can have devastating consequences. In orthopaedics, use of polymethyl methacrylate (PMMA) bone cement is commonplace, and the impact on glove strength and perforation risk is not fully understood. This study aimed to examine the resistance to perforation and thickness of gloves following PMMA exposure, in accordance with the International Organization for Standardization (ISO) standard for glove integrity. METHODS: Pairs of gloves were separated and randomly sorted into exposure and control groups. Twenty pairs of latex and 40 pairs of polyisoprene gloves were used. Exposure group glove cuffs were in contact with cement from a single surface of the glove for 13 min as cement cured. Force to perforation and glove thickness were tested in accordance with ISO guidelines. RESULTS: Latex gloves were found to have a significantly increased force to perforation following PMMA exposure (10.26 Newtons (N) vs. 9.81 N, P = 0.048). Both polyisoprene under- and over-gloves were shown to have no significant change in strength to perforation post exposure (9.69 N vs. 9.83 N, P = 0.561, and 10.26 N vs. 10.65 N, P = 0.168, respectively). All groups were over the ISO standard minimum strength of 5 N. CONCLUSIONS: Exposure of latex and polyisoprene surgical gloves to PMMA bone cement does not appear to increase glove perforation risk and rather may improve natural rubber latex glove strength. This study supports the use of latex and polyisoprene surgical gloves in procedures that involve the handling of PMMA bone cement.

Development of a Mass Spectrometry Imaging Method to Evaluate the Penetration of Moisturizing Components Coated on Surgical Gloves into Artificial Membranes.

Skin dryness and irritant contact dermatitis induced by the prolonged use of surgical gloves are issues faced by physicians. To address these concerns, manufacturers have introduced surgical gloves that incorporate a moisturizing component on their inner surface, resulting in documented results showing a reduction in hand dermatitis. However, the spatial distribution of moisturizers applied to surgical gloves within the integument remains unclear. Using matrix-assisted laser desorption/ionization (MALDI)-mass spectrometry imaging (MSI), we investigated the spatial distribution of moisturizers in surgical gloves within artificial membranes. Recently, dermal permeation assessments using three-dimensional models, silicone membranes, and Strat-M have gained attention as alternative approaches to animal testing. Therefore, in this study, we established an in vitro dermal permeation assessment of commercially available moisturizers in surgical gloves using artificial membranes. In this study, we offer a methodology to visualize the infiltration of moisturizers applied to surgical gloves into an artificial membrane using MALDI-MSI, while evaluating commercially available moisturizer-coated surgical gloves. Using our penetration evaluation method, we confirmed the infiltration of the moisturizers into the polyethersulfone 2 and polyolefin layers, which correspond to the epidermis and dermis of the skin, after the use of surgical gloves. The MSI-based method presented herein demonstrated the efficacy of evaluating the permeation of samples containing active ingredients.

Elastic Tactile Sensor Glove for Dexterous Teaching by Demonstration.

We present a thin and elastic tactile sensor glove for teaching dexterous manipulation tasks to robots through human demonstration. The entire glove, including the sensor cells, base layer, and electrical connections, is made from soft and stretchable silicone rubber, adapting to deformations under bending and contact while preserving human dexterity. We develop a glove design with five fingers and a palm sensor, revise material formulations for reduced thickness, faster processing and lower cost, adapt manufacturing processes for reduced layer thickness, and design readout electronics for improved sensitivity and battery operation. We further address integration with a multi-camera system and motion reconstruction, wireless communication, and data processing to obtain multimodal reconstructions of human manipulation skills.

Towards a green and just industry? Insights from traditional leather districts in Southern Italy.

Artisanal processes are crucial for examining major economic development, industrial, and historical forces. Among the different industries, fashion is regarded as one of the most polluting business activities. The indication of origin "Made in Italy" has found extensive scholarly economic appetite; however, the leather sector in its socioeconomic and environmental components has been scarcely investigated. The paper at hand analyzes selected leather poles in Campania, Italy - namely, the tanning, shoes, and gloves industries. Besides, the industrial processes and sustainability implications required are examined to render these productions. The tannery districts are characterized by a strong artisanal component in the productive processes and follow diverse geographical agglomeration rationales. Field visits and in-depth interviews were conducted in the local districts of Solofra (tanning), Grumo Nevano-Aversa (shoemaking), and Rione Sanità pole (glove-making). The local activities and specific operational industrial processes are mapped, highlighting the technical industrial phases needed to produce the three leather outputs. Besides, the sustainability repercussions of these industries are analyzed. The study finds that most of the activities heavily rely on traditional techniques and would benefit in socioeconomic and environmental terms from modernization, management, ICT upgrades, as well as process revisions and spatial agglomeration organization. Selected sectoral sustainable development, CSR, ESG, labeling, ethics, and environmental strategy recommendations are presented - especially concerning tanning wastewater treatment. These measures result in a compulsion to face the massive multidimensional crises occurring in the three sectors and business activities.

Trends in the use of radiation protection and radiation exposure of European endourologists: a prospective trial from the EULIS-YAU Endourology Group.

INTRODUCTION: Due to the radiation exposure for the urology staff during endourology, our aim was to evaluate the trends of radiation protection in the operation room by endourologists from European centers and to estimate their annual radiation. METHODS: We conducted a multicenter study involving experienced endourologists from different European centers to evaluate whether the protection and threshold doses recommended by the International Commission on Radiation Protection (ICRP) were being followed. A 36-question survey was completed on the use of fluoroscopy and radiation protection. Annual prospective data from chest, extremities, and eye dosimeters were collected during a 4-year period (2017-2020). RESULTS: Ten endourologists participated. Most surgeons use lead aprons and thyroid shield (9/10 and 10/10), while leaded gloves and caps are rarely used (2/10 both). Six out of ten surgeons wear leaded glasses. There is widespread use of personal chest dosimeters under the apron (9/10), and only 5/10 use a wrist or ring dosimeter and 4 use an eye dosimeter. Two endourologists use the ALARA protocol. The use of ultrasound and fluoroscopy during PCNL puncture was reported by 8 surgeons. The mean number of PCNL and URS per year was 30.9 (SD 19.9) and 147 (SD 151.9). The mean chest radiation was 1.35 mSv per year and 0.007 mSv per procedure. Mean radiation exposure per year in the eyes and extremities was 1.63 and 11.5 mSv. CONCLUSIONS: Endourologists did not exceed the threshold doses for radiation exposure to the chest, extremities and lens. Furthermore, the ALARA protocol manages to reduce radiation exposure.

Unveiling the efficacy of latex gloves in preventing viral infections during needlestick injuries: An in vitro mixed-methods study.

BACKGROUND: Gloves are personal protective equipment designed to prevent contamination and reduce the spread of microorganisms. This study aimed to assess in vitro the physical integrity of latex gloves and the retention of biological contamination in healthcare simulation. METHOD: Three different batches of latex procedure gloves from five different brands and specific batches were evaluated before use for physical integrity by the standard protocols of the Society for Testing and Materials (ASTM) and of the American Food and Drug Administration (FDA). Moreover, the retention of biological contamination by latex procedure gloves in needlestick injury simulation with crystal violet and bacteriophages were applied in order to mimic human blood and virus presence. RESULTS: Brands D and C showed the best and worst results in the immediate inspections and after 2 min, respectively. For Brand C, damage occurred in one finger/region in a total of 12 gloves, while seven gloves were damaged/unable to be worn. Brand D presented only two gloves with tears and/or holes in one finger/region. Regarding the viral contamination, in a simulated needlestick injury, data showed no significant difference among the groups. CONCLUSION: All glove brands presented physical damage that might affect the spread of microorganisms. The gloves did not exert an additional protective effect during a needlestick injury simulation in accordance with the two techniques used in this study.

How and why do healthcare workers use gloves in two Norwegian nursing homes?

BACKGROUND: Incorrect glove use can cause cross-contamination and healthcare-associated infections. Previous research has identified reasons for this, such as lack of indication, improper changing, and poor hand hygiene post use. Limited research has investigated the reasons behind healthcare workers' glove usage. AIM: To develop an in-depth understanding of healthcare worker (HCW) attitudes and perceptions of glove use and to explore barriers and facilitators as well as compliance with national guidelines. METHODS: A small-scale convergent-parallel mixed methods study design consisting of observations with focus group interviews (FGIs) by using the Systems Engineering Initiative for Patient Safety model (SEIPS). The study was conducted at two Norwegian municipal nursing homes in Oslo for two weeks in January-February 2023. FINDINGS: Out of 73 observations, gloves were used in 67 episodes, not worn even if indicated in six observations, and were overused 16 times (21.9%). Lack of hand hygiene after glove removal was observed in 36 out of 67 instances (53.7%). Two FGIs disclosed that glove usage decisions are shaped by habits, knowledge, experience, and emotions linked to patient requirements, tasks, and glove type. Double gloves were used for self-protection and efficiency. Availability of gloves was a facilitator, while poor glove quality posed a barrier. CONCLUSION: Despite HCWs' knowledge of glove guidelines, their attitudes did not consistently ensure compliance. This study underscores the need for targeted interventions to improve hand hygiene after glove removal, urging awareness of glove overuse to reduce infections, protect HCWs' skin, and promote sustainability.

Teleoperated Grasping Using Data Gloves Based on Fuzzy Logic Controller.

Teleoperated robots have attracted significant interest in recent years, and data gloves are one of the commonly used devices for their operation. However, existing solutions still encounter two challenges: the ways in which data gloves capture human operational intentions and achieve accurate mapping. In order to address these challenges, we propose a novel teleoperation method using data gloves based on fuzzy logic controller. Firstly, the data are collected and normalized from the flex sensors on data gloves to identify human manipulation intentions. Then, a fuzzy logic controller is designed to convert finger flexion information into motion control commands for robot arms. Finally, experiments are conducted to demonstrate the effectiveness and precision of the proposed method.

Statistical study and investigation of the cut-resistant and thermo-physiological performance of protective gloves: a new prospective.

Objectives. This research investigated the performance properties of protective gloves alongside improvement in thermo-physiological comfort properties. Methods. Knitted gloves prepared from filament stainless steel, filament Kevlar, staple spun Kevlar and filament glass were used in the core, while 100% viscose rayon and 50/50% polyester/viscose rayon were used in the sheath. Gloves were tested for cut resistance, tear resistance, puncture resistance and abrasion resistance as the prime focus, and thermo-physiological comfort properties were also tested. In this research, a multi-response optimization technique, i.e., principal component analysis, was applied to identify the best yarn combination for gloves based on the aforementioned properties. Thermal images were also taken in constant ambient conditions for temperature distribution maps across the hand's surface. Results. All of the results were evaluated statistically with analysis of variance, and concluded that the effects of the core yarn on thermo-physiological properties were less significant. Conclusion. The results revealed that samples having dual-core yarn exhibited better in terms of overall properties. The sample having dual-core filament Kevlar and staple spun Kevlar ranked the best. In addition, developed samples exhibited better comfort properties than the control sample.

Assessing the impact of the COVID-19 pandemic on latex glove usage and latex allergy complaints among nurses: A descriptive study.

BACKGROUND: The coronavirus 2019 (COVID-19) pandemic has led to a significant increase in the use of latex gloves among nurses. However, concerns about the rise in latex allergies and related complaints due to this increase remain uncertain.OBJECTIVE: This study aims to assess the rates of latex glove usage and allergy-related complaints among nurses working in hospitals during the COVID-19 pandemic. METHODS: Between May 15 and June 15, 2021, ethical approvals were obtained for a cross-sectional study involving 448 volunteer nurses. Descriptive statistics were used to represent categorical values as counts (n) and percentages (%), while continuous values were represented as mean±standard deviation. The normal distribution of the data was assessed using the Kolmogorov-Smirnov and Shapiro-Wilk tests. Comparative analyses were conducted using paired sample t-test, Pearson's chi-squared (x2) test, McNemar's chi-squared (x2) test, and Spearman correlation analysis. RESULTS: Before the pandemic, the average number of invasive procedures was 45.13±26.48, whereas during the pandemic, this rate increased to 50.23±29.14. The average glove usage duration went from 7.69±3.13 hours to 14.73±3.68 hours during the pandemic. Among nurses, the rate of allergic symptoms, which was previously at 31.5%, rose to 33.3% during the pandemic.CONCLUSION: This study revealed a significant increase in daily invasive procedures and the use of latex gloves among nurses during the pandemic period. Simultaneously, the frequency of allergic symptoms also rose. These findings underscore the importance of awareness and preventive measures, particularly regarding latex allergies, in the healthcare field.

A sensorised surgical glove to improve training and detection of obstetric anal sphincter injury: A preclinical study on a pig model.

OBJECTIVE: To create a sensorised surgical glove that can accurately identify obstetric anal sphincter injury to facilitate timely repair, reduce complications and aid training. DESIGN: Proof-of-concept. SETTING: Laboratory. SAMPLE: Pig models. METHODS: Flexible triboelectric pressure/force sensors were mounted onto the fingertips of a routine surgical glove. The sensors produce a current when rubbed on materials of different characteristics which can be analysed. A per rectum examination was performed on the intact sphincter of pig cadavers, analogous to routine examination for obstetric anal sphincter injuries postpartum. An anal sphincter defect was created by cutting through the vaginal mucosa and into the external anal sphincter using a scalpel. The sphincter was then re-examined. Data and signals were interpreted. MAIN OUTCOME MEASURES: Sensitivity and specificity of the glove in detecting anal sphincter injury. RESULTS: In all, 200 examinations were performed. The sensors detected anal sphincter injuries in a pig model with sensitivities between 98% and 100% and a specificity of 100%. The current produced when examining an intact sphincter and sphincter with a defect was significantly different (p < 0.001). CONCLUSION: In this preliminary study, the sensorised glove accurately detected anal sphincter injury in a pig model. Future plans include its clinical translation, starting with an in-human study on postpartum women, to determine whether it can accurately detect different types of obstetric anal sphincter injury in vivo.

Reducing hand radiation during renal access for percutaneous nephrolithotomy: a comparison of radiation reduction techniques.

Percutaneous nephrolithotomy confers the highest radiation to the urologist's hands compared to other urologic procedures. This study compares radiation exposure to the surgeon's hand and patient's body when utilizing three different techniques for needle insertion during renal access. Simulated percutaneous renal access was performed using a cadaveric patient and separate cadaveric forearm representing the surgeon's hand. Three different needle-holding techniques were compared: conventional glove (control), a radiation-attenuating glove, and a novel needle holder. Five 300-s fluoroscopy trials were performed per treatment arm. The primary outcome was radiation dose (mSv) to the surgeon's hand. The secondary outcome was radiation dose to the patient. One-way ANOVA and Tukey's B post-hoc tests were performed with p < 0.05 considered significant. Compared to the control (3.92 mSv), both the radiation-attenuating glove (2.48 mSv) and the needle holder (1.37 mSv) reduced hand radiation exposure (p < 0.001). The needle holder reduced hand radiation compared to the radiation-attenuating glove (p < 0.001). The radiation-attenuating glove resulted in greater radiation produced by the C-arm compared to the needle holder (83.49 vs 69.22 mGy; p = 0.019). Patient radiation exposure was significantly higher with the radiation-attenuating glove compared to the needle holder (8.43 vs 7.03 mSv; p = 0.027). Though radiation-attenuating gloves decreased hand radiation dose by 37%, this came at the price of a 3% increase in patient exposure. In contrast, the needle holder reduced exposure to both the surgeon's hand by 65% and the patient by 14%. Thus, a well-designed low-density needle holder could optimize radiation safety for both surgeon and patient.

A transcutaneous acupoint electrical simulation glove for relieving the mental fatigue of crane drivers in real building environment.

In the field of construction, the lifting environment of precast parts is more complex, which leads to the driver's fatigue. When the tower crane driver appears driving fatigue, it will appear slow operation response, hoisting precast parts appear abnormal swing, which will endanger the safety of on-site operators. Therefore, this study developed a kind of transcutaneous acupoint electrical stimulation gloves. When the crane driver wears this kind of glove, the good contraction of the glove can make the stimulation electrode closely fit with the three points, so as to perform electrical stimulation on the Neìguan point (PC6), Láogóng point (PC8) and Hégu point (L14) of the palm to relieve the driver's driving fatigue. In this study, non-periodic transcutaneous acupoint electrical stimulation (NPTAES) was used to stimulate human acupuncture points. This is different from the traditional periodic transcutaneous acupoint electrical stimulation (PTAES) method for relieving mental fatigue. In addition, this study used hilbert marginal spectral entropy (HMSE) to calculate the heart rate variability (HRV) characteristics of the subjects, so as to detect and analyze the driving fatigue of the drivers. At the same time, the drivers' blinking frequency and electroencephalogram (EEG) characteristics were analyzed comprehensively. The results show that: The NPTAES method used in this study is superior to the PTAES method in alleviating driving fatigue and greatly improves the efficiency of tower crane drivers. Compared to other methods, the HMSE method proposed in this study, when analyzing signals, stronger ability to characterize signal characteristics.

Masking Strategy Constructed Metal Coordination Hydrogels with Improved Mechanical Properties for Flexible Electronic Sensors.

Metal coordination hydrogels (MC-HGs) that introduce dynamically coordinate bonds together with metal ionic conduction have attracted considerable attention in flexible electronics. However, the traditional soaking method alleged to have technical scalability faces the challenge of forming MC-HGs with a "core-shell" structure, which undoubtedly reduces the whole mechanical properties and ionic stimulation responsiveness required for flexible electronics materials. Herein, a novel strategy referred to as "masking" has been proposed based on the theory of the valence bond and coordination chemistry. By regulating the masking agents and their concentrations as well as pairing mode with the metal ions, the whole mechanical properties of the resulting composites (MC-HGsMasking) show nearly double the values of their traditional soaking samples (MC-HGsSoaking). For example, the fracture stress and toughness of Fe-HGsMasking(SA, 5.0 g/L) are 1.55 MPa and 2.14 MJ/m3, almost twice those of Fe-HGsSoaking (0.83 MPa and 0.93 MJ/m3, respectively). Microstructure characterization combined with finite element analysis, molecular dynamics, and first-principles simulations demonstrates that the masking strategy first facilitating interfacial permeation of metal complexes and then effective coordination with functional ligands (carboxylates) of the hydrogels is the mechanism to strengthen the mechanical properties of composites MC-HGsMasking, which has the potential to break through the limitations of current MC-HGs in flexible electronic sensor applications.

Gloves Contamination During Revision Surgery for Periprosthetic Joint Infection.

BACKGROUND: The use of double gloving has become a standard practice for joint replacement surgeons. However, since there are limited data on how gloves are contaminated during both primary and revision arthroplasty, no precise protocol exists to direct surgeons on when, or if, to change their gloves. The goals of this preliminary study were to evaluate the contamination of gloves during total joint arthroplasties (TJAs). METHODS: We included 25 infected cases and 10 primaries, which were performed at the same institution using the same surgical protocol from 3 fellowship trained surgeons. Samples were taken every 20 minutes from the start of the surgery until the joint was irrigated. Procedural steps were noted. To evaluate cross-contamination during infected cases, we sampled gloves using blood agar plates. In primary cases, culture swabs of anterior chamfer cuts and sterile instruments on the back table were used as negative controls. Next-generation sequencing (NGS) was used as an adjunct to identify low virulence bacteria. RESULTS: In the primary cases, all samples were found culture negative but 3 (8.1%) of the 37 samples were found to have a low, unidentifiable bacterial mass via NGS testing. In the infected cases, 41 (59.4%) of the 69 samples yielded positive microbial results. The positivity rate was higher in the samples collected after the arthrotomy was performed (70%) compared to samples collected before the arthrotomy was performed (40%), and the surgeon was only dissecting superficial layers (P = .502). CONCLUSION: Gloves seem to be a common source of cross-contamination in the intraoperative field during revision TJA. Due to the higher percent of positive samples following the opening of the joint, we hypothesize that the arthrotomy allows for the spread of bacteria across the operative site. While further investigation is necessary to formulate a precise protocol for the changing of gloves during TJA, it may be beneficial to perform a thorough irrigation of the joint and change of the gloves immediately following arthrotomy.

Contact allergy to rubber accelerators in consecutively patch tested Danish eczema patients: A retrospective observational study from 1990 to 2019.

BACKGROUND: Rubber accelerators are used in the production of rubber gloves and may cause contact allergy. OBJECTIVES: To estimate long-term trend and prevalence of contact allergy to rubber accelerators for a 30-year period in Denmark, high-risk occupations, and exposures. METHODS: Data from all patients with contact dermatitis consecutively patch tested at the department of Skin and Allergy Gentofte hospital with the rubber accelerators from the European baseline series (EBS) from 1990 to 2019, were analysed. Further, patients under suspicion of rubber accelerator contact allergy were additionally patch-tested with rubber accelerators from the specialised rubber series from 2005 to 2019 and these were additional extracted. RESULTS: The overall prevalence of contact allergy to one or more of the rubber accelerators from the EBS series was 2.7% with a significant decline in the first 12-years, followed by a stable frequency in the past 18-years. Associations with occupational contact dermatitis, hand dermatitis, and leg/foot dermatitis were found. Wet-work occupations were most often affected and gloves the most frequent exposure. CONCLUSIONS: Contact allergy to one or more of the rubber accelerators from the EBS is frequent and has been unchanged for several decades, which calls for prevention.

Fever glove hand-shake method safe blood collection from children's fingertips in COVID-19 fever clinic.

BACKGROUND: During the coronavirus disease 2019 (COVID-19) epidemic, the fever clinic is an important link for screening and diagnosing whether a patient is infected with the novel coronavirus. Blood collection from children's fingertips is a commonly used detection method; however, in children, the blood collection process may cause discomfort and resistance. To address this problem, the use of heating gloves combined with hand swinging can be considered for fingertip blood collection in children. AIM: To explore the application of fever gloves with the handshaking method for fingertip blood collection from children in fever clinics during the COVID-19 epidemic. METHODS: A total of 100 children were selected for fingertip blood collection at the fever clinic of our hospital from June 2022 to June 2023 and were divided into two groups using a randomized numerical table method, with 50 cases in each group, including the control and observation groups. The patients in the control group followed the doctor's instructions to cooperate with the routine fingertip blood collection method, and the patients in the observation group followed the doctor's instructions to cooperate with the static fever gloves with the shaking hands method of children's fingertip blood collection. The level of the six blood routine and collection indexes, and the satisfaction of the examination of the patients in the peripheral blood group and the fever gloves with the shaking hands method of the children's fingertip blood collection group were compared. RESULTS: The red and white blood cell count, hemoglobin, and red blood cell pressure volume in the observation group were higher than those in the control group (P < 0.05); the platelet count in the control group was lower than that in the observation group (P < 0.05); the number of times of squeezing the fingertip, the average time of blood collection, and the score of puncture pain in the observation group were significantly better than those in the control group (P < 0.05); and satisfaction with the routine blood examination in the observation group was greater than that in the control group. CONCLUSION: The application value of the fever gloves with shaking hands method for children's fingertip blood collection was better, the accuracy of examination indexes was higher, and patient satisfaction with the examination was greater.

Knitted Structures Made of Antibacterial Fibers Intended for Protective Gloves.

At a time of growing epidemic hazards caused by a very rapid evolution of dangerous pathogens, there is a pressing demand for bioactive textiles. Therefore, the development of high-quality knitted structures that could be used as bioactive protective materials has become a priority. This publication describes the fabrication of functional knitted structures from previously prepared antibacterial cellulose fibers containing nanosilica with immobilized silver nanoparticles. The structural and physical parameters of knitted fabrics made from them were studied with a view to their potential application in bioactive protective gloves. Tests of the basic structural and physical parameters of the knitted fabrics did not show that the nanomodifier applied in fibers significantly impacts the physical properties of the resulting fabrics. Moreover, water vapor permeability, cut resistance, and pH test results relevant to the functional and protective properties of interest and to user comfort showed that the obtained fabrics can be used in the production of bioactive protective gloves.

Comparative Assessment of Hypersensitivity Reactions on Use of Latex and Nitrile Gloves Among General Dental Practitioners: A Cross-Sectional Study.

Background  Latex gloves are used more frequently by dental, medical, and other health workers and their allergy has also increased as a result, dentists are frequently exposed to latex or nitrile gloves for extended periods. This prolonged exposure often leads to local symptoms such as itching and erythema rashes. However, some dentists experience more severe systemic reactions, including swelling, wheezing, breathlessness, and even an increase in blood pressure. Latex gloves have recently been replaced with nitrile gloves, powder-free latex gloves, and other preventive measures to avoid allergies. Latex allergies are more common than nitrile allergies, as they are hypoallergic with properties such as tear-resistant and provide an equivalent level of defense against various dental materials and procedures. Women experience more allergic reactions than men. Not only are dentists exposed to this allergy but the patient can also be exposed during the procedure. This study aimed to assess hypersensitive reactions to the use of latex and nitrile gloves among general dentist practitioners and dental students. Methods A cross-sectional study was conducted in Wardha, Maharashtra, India, to evaluate allergic reactions to latex and nitrile gloves among general dental practitioners and dental students at college. A questionnaire-based study was conducted with a sample size of 356. The self-administered survey inquiries about glove compliance, the time they wear the gloves, regular glove use, and problems related to latex or nitrile contact. In addition, dentists and dental students' personal histories of allergies to medications, dental materials, disinfectants, or other chemicals were noted, as well as signs and symptoms they experienced from prolonged contact with gloves. Result The total number of responses collected was 356. The investigated dentists were 274 and 82 were students, out of which 122 (34.3%) were male and 234 (65.7%) were female. Responses showed that 224 (62.92%) used latex gloves, and 132 (37.08%) used nitrile gloves. Among 356 participants 175 showed symptoms by the use of both latex and nitrile gloves, out of which 85.14% showed allergy to latex and 14.85% to nitrile gloves. All 175 individuals showed type IV hypersensitivity, and none of them showed type I. Conclusion Latex gloves are not the only option for dentists who experience itching when wearing gloves; they can also use powered-free latex gloves and nitrile gloves or take precautions such as not using oil-based cream, washing their hands, or taking pharmaceuticals such as cetirizine, pheniramine maleate, etc. However, when symptoms worsen and include erythema, swelling, wheezing, and in some cases, anaphylactic shock may occur they tend to use alternative gloves.